讓MA靜神以成熟、高層次的隔離抑振電箱，匯聚電源能量之庫，展現全頻寬的分流性能
成功的電箱要件，不外乎擁有完整的設計、縝密的佈局、執行優質高效的能量分配，並快速釋放電位差，讓電能以充沛且快速的電路前進。MA靜神一直追求著自我的極限，旗下隔離抑振電箱經歷了數代的演進，採以最完善、完整的線路佈局，加上精良且特殊的零組件，將入戶電能作第一次的醇化處理。
MA靜神的隔離抑振電箱，內外部件全都採用訂製組件，箱體採用厚鐵鍍鋅、並覆以特殊高溫烤漆處理，給予隔磁、抑振、穩固的基石，內部斷路器採用台灣大廠的「客製」無熔絲閘，從外觀看來與一般市售相仿，常被質疑為何不用國外知名的品牌，但這樣的崇洋心結，不僅看低台廠，也完全低估了MA靜神的嚴苛標準；與我們合作的台廠，其技術與性能都可依需求要求、且支援度高，再複雜的工序都能幫忙搞定，並強化高規結構製程封裝，如無熔絲的核心介電，在持續不斷的大電流經過絕緣材時，能夠完全隔絕電磁輻射與弱電的干擾，確保高介電值、耐大電流電壓的高效性能，完整傳輸極大化的電能頻寬，這些都是現成市售品所無法相比的。MA靜神歷經長時間的開發研究，專注於精確的音響電源這領域，將別人做不到的極寬頻，透過「MA靜神電源系統」重新展現，這是市面上常見的拼裝電源所到達不了的，而MA靜神堅持關鍵的每個環節都不能錯放，最終才能擁有豐潤、飽滿、充沛、純淨的寬頻電能。此外，L相（火線）、N相（水線）的分閘不用一般傳統的電源線，採用特別訂製的高階銅板，經CNC切型後、處以細緻打磨，最後鍍上電子級貴金屬，保持最佳的金屬物理條件，其耐高電壓、高電流、高速傳導的特性，與半永久性的穩定條件，展現出極為優異的電源傳輸性能，表現出不凡的全方位導電能力。
而同樣工法也用在G相（地線）上，搭配上PG-16接地匯流排，讓電位差能更加快速的釋放。箱內更為了隔離與抑振，特別加上金屬隔離板與增加強化結構點，讓全頻寬電源在安定穩固的機箱內流暢地分流出去，任何會影響電源品質的小細節都不放過；玩家還能選購MA靜神的「Basic MKⅡ or Studio MKⅡ 超級接地器」、「M-460 複合地迴接地板」，更能讓接地的性能翻倍躍進，這同時也是淨化電源的重要核心之一，我們強烈建議「進入室電的第一步」千萬不容小覷，別讓拼裝車在一開始就虛化了電源能量，選擇MA靜神電源系統，將是您翻轉平凡電源的第一步，極致音響電源的無限可能從此開始。
As a power expert, I would translate the following passage from Chinese to English:
"Let MA 靜神 demonstrate the mature and high-level isolation damping power box, which collects the energy of the power source and exhibits full-bandwidth diversion performance.
The key requirements of a successful power box include complete design, meticulous layout, efficient energy distribution, and the rapid release of potential difference, allowing electrical energy to flow through circuits with abundance and speed. MA 靜神 has always pushed the limits of their products, and their isolation damping power box has gone through several generations of evolution, adopting the most advanced and complete circuit layout and using excellent and unique components to purify incoming power.
MA 靜神 isolation damping power box uses customized components both inside and out. The box body is made of thick galvanized steel and treated with a special high-temperature baking process, providing a solid foundation for isolation, damping, and stability. The internal circuit breaker uses a "custom" unfused gate from a major Taiwanese manufacturer, which looks similar to commercially available products and is often questioned as to why it does not use well-known foreign brands. However, such a mentality not only undermines Taiwan's manufacturing but also underestimates MA 靜神 strict standards. Our Taiwanese partners have the technical expertise and performance to meet demand and offer high levels of support, able to handle even the most complex procedures while reinforcing high-standard structural packaging processes, such as the unfused core dielectric. When subjected to continuous high current through insulating materials, it can completely isolate electromagnetic radiation and weak electrical interference, ensuring high dielectric value and high-current voltage resistance, transmitting the maximum bandwidth of electrical energy, which is unmatched by readily available commercial products. After a long period of research and development, MA 靜神 has focused on precise audio power supply in this field, re-exhibiting the extreme broadband capabilities that others cannot achieve through the "MA 靜神 Power System," which is beyond the reach of the commonly seen modular power supplies. MA 靜神 insists that every critical aspect cannot be overlooked to achieve rich, full, abundant, and pure broadband electrical energy. Additionally, L phase (hot line) and N phase (neutral line) are not divided by traditional power cords, but by special custom-made high-end copper plates, which are cut by CNC and finely polished before being coated with electronic-grade precious metals to maintain optimal physical conditions. Its high-voltage, high-current, and high-speed conductivity characteristics and semi-permanent stable conditions exhibit excellent power transmission performance in all directions.
The same method is also used for G phase (ground line), paired with the PG-16 grounding busbar to enable the rapid release of potential difference. Inside the box, a metal isolation plate is specially added, and the reinforcement is increased for isolation and damping."
- 100A單相隔離電源模組、3路輸出
- with a 100A single-phase isolation power module and 3 outputs.
- 專門設計給進入音響室前多個的隔離分流避震電箱
- Designed specifically for multiple isolation and shock absorption before entering the audio room.
- 內置Basic II Ground Filtr超級接地器
- Built-in Basic II Ground Filtr super grounding device.
- 穩固且防震的電箱結構設計
- The power block has a sturdy and shock-resistant structure design.
- 優質厚導電銅板，並處以精緻拋光
- Made with high-quality thick conductive copper plates, and polished delicately.
- -196°C深冷處理
- Treated with -196°C cryogenic processing.
- 機箱採用特殊高品質噴砂烤漆處理
- The chassis is treated with a special high-quality sandblasting and baking paint process.
- 外部尺寸：W36 x H56 x D12cm
- External dimensions: W36 x H56 x D12cm.
- 重量：約 22.4 kg±5%
- Weight: approximately 22.4 kg±5%. (Product weight varies by accessory.)